Protool MXP 800 E

12
Noise/Vibration Information
Measured values determined according to
EN 50 144.
MXP 800 E
Typically the A-weighted sound pressure level of
the tool is 86 dB (A).
The noise level when working can exceed
99 dB (A).
Inaccuracy of measurement K = 3 dB (A).
Wear hearing protection!
The typical hand-arm vibration is below 2.5 m/s
2
.
MXP 1000 EQ
Typically the A-weighted sound pressure level of
the tool is 88 dB (A).
The noise level when working can exceed
101 dB (A).
Inaccuracy of measurement K = 3 dB (A).
Wear hearing protection!
The typical hand-arm vibration is below 2.5 m/s
2
.
Declarations of Conformity
We declare under our sole responsibility that
this product is in conformity with the following
standards or standardization documents:
EN 50 144-1, EN 55 014-1, EN 55 014-2,
EN 61 000-3-2, EN 61 000-3-3 according to the
provisions of the regulations 98/37/EC,
2004/108/EC.
Manfred Kirchner
Research and development
Protool GmbH
Wertstr. 20
D-73240 Wendlingen
20_07_2007