5
No more lifting, just ride your bicycle (Max. 30kg) on the bike carrier.
ASSEMBLY
First prepare the Pro-User Diamant TG bike carrier for the use of the ride-on-
ramp (not applicable for Diamant I).
Place the four eyelets in the ends of the ramp (photo 1-3) and secure them with
the small socket screw (photo 4).
HOW TO USE
Take the loading rail and unfold it into a single length.
Install the ride-on ramp onto the wheel holder using the pin and the special hole.
Than simply drive your bicycle on the bike carrier without lifting.
To Next Page
Loading...
Need help?
General
