ProVero ID-0055 - User Manual

ID-0055
Instruction/Instrukcja
Welcome to use ID-0055 infrared motion sensor!
The product adopts good sensitivity detector and integrated circuit. It gathers automatism,
convenience, safety, saving-energy and practical functions. It utilizes the infrared energy from
human as control-signal source and it can start the load at once when one enters detection field.
It can identify day and night automatically. It is easy to install and used widely.
SPECIFICATION:
Power Source:12V Detection Range: 120°/360°
Detection Distance: 3m/6m (choice) (<24℃) Working Temperature: -20~+40℃
Ambient Light: 10LUX/2000LUX (choice) Working Humidity: <93%RH
Time Delay: 5s, 30s, 1min, 3min, Detection Moving Speed: 0.6-1.5m/s
5min, 8min (choice) Installation Height: 2.2-4m (ceiling mounting)
Rated Load: Max.60W-12V Installation Height: 1.8-2.5m (wall mounting)
120W-24V
FUNCTION:
➢ Can identify day and night automatically: when turn to SUN ((below is SUN)), it will work day
and night, when turn it to MOON (above is moon), it will only work in the ambient light less
than 10LUX. As for adjustment, please refer to testing way.
➢ SENS adjustable: It can be adjusted according to using location. The detection distance of
low sensitivity could be only 3m and high sensitivity could be 6m which fits for large room.
➢ Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.
Good sensitivity Poor sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
➢ Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
➢ Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, light etc.
➢ Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall
plants etc.

Summary

Product Specifications

Power Source

Specifies the required power input for the sensor.

Detection Distance

Defines the range at which motion is detected.

Ambient Light

Sets the threshold for light level detection.

Time Delay

Configures the duration the load remains active after detection.

Rated Load

Indicates the maximum power capacity the sensor can control.

Detection Range

Specifies the angular coverage of the motion sensor.

Working Temperature

Defines the operational temperature limits for the device.

Working Humidity

Specifies the acceptable range of humidity for operation.

Detection Moving Speed

Sets the speed range for effective motion detection.

Installation Height

Provides recommended mounting heights for ceiling and wall installations.

Key Functions

Day and Night Identification

Sensor can automatically distinguish between day and night for operation.

Adjustable Sensitivity (SENS)

Allows adjustment of detection distance based on location needs.

Continuous Time-Delay

Resets the time delay upon receiving new motion signals.

Installation Advice

Avoid Reflective Surfaces

Do not point detector towards mirrors or highly reflective objects.

Avoid Heat Sources

Mount away from heating vents, AC units, or direct light sources.

Avoid Moving Objects

Do not point towards objects that sway in the wind, like curtains.

Connection and Wiring

Wiring Diagram

Illustrates how to connect power source and load to the sensor.

Powering On and Testing

Procedure for connecting power, initial warm-up, and testing operation.

Troubleshooting Common Issues

Load Does Not Work

Checks for correct connections, load status, and light settings.

Poor Sensitivity

Addresses issues like hindrances, temperature, signal source, or height.

Sensor Fails to Shut Off Load

Troubleshoots continuous signals or incorrect time delay settings.

ProVero ID-0055 Specifications

General

Brand	ProVero
Model	ID-0055
Category	Security Sensors
Language	English