- 10 -
Connectthedust extractor!
If connections for dust extraction andcollecting
devices areavailable, make sure thattheseare
connected and in use.
Donot use thecable forpurposesitisnot
intended for!
Donot pull the mains plug out of the socket by
thecable. Protectthecableagainst heat, oil and
sharp edges.
Secure the work piece!
Use theclampingdevicesoravice to hold the
work piece. Itistherebymore reliably held than
byhand.
Avoidabnormal bodypositions!
Ensure safe standingandkeepyour balance at
all times.
Service your tools withgreatest care!
Keepyourtools sharp andclean, in ordertowork
safer andbetter.
Follow the maintenance instructions and the
notes about tool change.
Checkthecable regularly and letitbe renewed
upon damage by a professionaltechnician.
Checktheexte
nsion cable regularly and letitbe
renewed if it is damaged.
Keephandlesdry andfree of oil andgrease.
Donot leave toolspanners inserted!
Always make sure thatspanners andadjustment
tools havebeenremoved before switching on.
Pull the plug outofthesocket:
if the tool is not in use, before maintenanceand
when changing the tools,e.g.sawblade, drill,
millingcutter.
Avoid unintended starting!
Make sure the switchisinoff position when
inserting the plug into the socket.
Outdooruseof extension cable.
Onlyuseapproved and specially marked
extension cables for outdooruse.
Bealert!
Beawareofwhatyou do. Approachyour work in
a reasonable way. Donot use the tool if you are
tired.
Checkthetool forpossibledamages!
Beforefurtheruseofthe tool,all safety features
or slightly damaged parts must be thoroughly
inspected for their correct function asintended.
Checkwhethermovable parts work correctly and
are neitherjammed nor damaged. All parts must
be correctly ass
embled and meet all
prerequisites for troublefree operation of the tool.
Damaged safety features and partsmust be
properlyrepaired or replacedbyanapproved
workshop if not specified otherwise in the
operating instructions.
Havedamaged switche
sreplaced in a service
workshop.
Donot use tools, on whichtheswitch canno
longer be switched on and off.
WARNING!
The use of other attachment tools and
accessories can cause risk of injury!
Letyour tool be repaired by a skilled electrician!
This tool correspondswiththeapplicable safety
regulations. Repairs must only be carried out by
a skilled electrician andbyusing originalspare
parts,asotherwiseaccidents cannot be ruled
out.
To Next Page
Loading...
