Need help?Do you have a question about the Proxxon Thermocut 12/E and is the answer not in the manual?
General| Power | 12 W |
|---|---|
| Voltage | 12V DC |
| Frequency | 50/60 Hz |
| 12V DC | Yes |
| Transformer | Included |
| Maximum Cutting Height | 50 mm |
| Heating Wire Diameter | 0.2 mm |
| Cutting Angle | 0 - 90° |
Details the Thermocut 12/E's capabilities for cutting foam materials with a hot wire.
Emphasizes compliance with safety regulations and proper usage for warranty validity.
Lists the items included with the Thermocut 12/E package.
Outlines key technical details like voltage, output, temperature range, and dimensions.
Provides a legend for identifying parts of the device as shown in Fig. 1.
Details how to adjust wire holders and fasten the hot wire for cutting.
Advises on cleaning the device using soft cloths and mild agents, avoiding solvents.
Guides users on environmentally responsible disposal of the machine.
Declares product conformity with EU directives and relevant standards.
Lists article numbers and descriptions for available spare parts for the Thermocut 12/E.
Provides guidance on handling defects and warranty claims through the dealer.
To Next Page
