PS Audio PerfectWave Power Plant 5

Other manuals for PS Audio PerfectWave Power Plant 5

Owner Reference Guide18 pages

Need help?

Do you have a question about the PS Audio PerfectWave Power Plant 5 and is the answer not in the manual?

Summary

Introduction

Important Safety Instructions

Read instructions, heed warnings, follow all instructions for safe operation.

Welcome and Product Overview

System Performance and Build Quality

Discusses product performance, build quality, and power ratings (VA vs. Watts) for optimal audio experience.

Getting Started: Installation

Installation Considerations: Location, Mounting, Cables

Guidance on placement, mounting, and selecting appropriate power cables for optimal setup.

Network Connectivity and Online Features

Explains connecting the unit to a network for enhanced functionality and accessing the online interface.

Quick Start Guide: Initial Setup

Power-Down and System Connection

Instructs to power down the system before connecting, then power up the P5 for automatic system initialization.

Cable Choice and Zone Configuration

Recommends heavy-gauge shielded cables and explains zone isolation for different equipment types.

CATV;Phone Protection and Home Screen

Details CATV/phone protection inlets and the home screen overview with status indicators.

SCOPE: Waveform and Status Analysis

Viewing Input;Output Vitals and Metrics

Explains how to view input/output waveforms, differentials, and detailed status metrics like voltage and THD.

Setup: Voltage and Mode Configuration

General Setup: Voltage Regulation and Distortion Control

Details adjusting output voltage and selecting between Low Distortion and High Regulation modes.

Zone Setup and Power Sequencing Modes

Covers naming zones, setting individual parameters, and configuring power sequencing/delay modes.

Waveform Options and CleanWave Functionality

Explains toggling between SineWave and MultiWave, and using the CleanWave function for degaussing.

Back Panel Hardware Identification

Identifies the power switch, fuse types, and CATV/phone protection ports on the back panel.

Information Screen: System Settings

Reset Button, SD Card, and CATV Ports

Explains the reset button, SD card usage for firmware, and CATV connection details.

System Setup Screen Parameters and Display

Details parameters available in the System Setup Screen and display brightness control options.

Warranty Information

Warranty Conditions and Remedy Procedure

Outlines warranty conditions, limitations, and the procedure for returning products for repair.

Warranty Exclusions and International Service

Covers warranty exclusions, invalidation, and how to obtain service outside the US.

Service and Support

North America Service and RA Number

Details contacting PS Audio for service in North America and obtaining a Return Authorization number.

US Service Process and Shipping

Explains the procedure for service within the US, including shipping and packaging requirements.

International Service and Product Details

Addresses service outside the US, voltage conversions, serial number, and purchase details.