www.pslocks.com | PS GmbH, Melisau 1255, 6863 Egg, Austria
12
TEN Manual
INSTALLATION WITH THE “LATCH75”
Features:
Small measurements and nice
design
Easy to install
Screw provided
No predetermined breaking
point
Tolerance +/- 1.0 mm
12.5 mm diameter
Combine the TEN and the
locking device only on request.
3070 MINI LOCKING DEVICE FOR ELECTRONIC LOCKS
This latch is used at sliding doors as well as at the back
wall of a drawers. The latch has a predetermined
breaking point of 35 kg.
The flexible pin allows a tolerance +/- 2 mm.
The "latch75" locking part is
available under the following
item numbers:
“latch75“ with rated
breaking point
“latch75s“ without rated
breaking point
To Next Page
