PSA Homeguard HG2000 User Manual

MODEL HG2000
INSTALLATION AND USER MANUAL
SMOKE ALARM PHOTOELECTRC DESIGN
IMPORTANT: READ ALL INSTRUCTIONS BEFORE INSTALLATION.
NO USER REPLACEABLE PARTS INSIDE THIS SMOKE ALARM.
WARNING:
Disconnecting smoke alarm from mounting base and/or removing the 9V battery
will render this smoke alarm inactive.
240VAC MAINS POWERED SINGLE STATION AND/OR INTERCONNECTABLE
(24 UNITS) PHOTOELECTRIC SMOKE ALARM. 9V REPLACEABLE BATTERY
BACKUP . TEST AND HUSH CONTROL AND LOW BATTERY INDICATION.
SPECIFICATION
ELECTRICAL RATING: 240VAC 50Hz, 80mA per alarm and interconnectable to
24 alarms.
WARNING: THIS SMOKE ALARM MUST ONLY BE WIRED TO A
240Vac 50Hz SINE WAVE CURRENT SUPPLY.
THIS SMOKE ALARM HAS AN EXPECTED SERVICE LIFE OF 10 YEARS
UNDER NORMAL CONDITIONS. WE RECOMMEND THAT YOU SHOULD
REPLACE THE SMOKE ALARM AFTER 10 YEARS FROM INSTALLA-
TION DATE TO ENSURE NORMAL OPERATION
1397-7201-01_HG2000:_ 2017.4.10 2:32 PM Page 1

PSA Homeguard HG2000 Specifications

General

Brand	PSA
Model	Homeguard HG2000
Category	Smoke Alarm
Language	English

Summary

1. RECOMMENDED LOCATIONS OF ALARMS

1.1-1.10 Location Guidance

Provides detailed instructions for placing smoke alarms in various rooms and areas for optimal detection.

2. MOBILE HOME INSTALLATION

2.1-2.3 Mobile Home Placement

Offers specific advice for installing smoke alarms in mobile homes based on insulation and temperature.

3. AVOID THESE LOCATIONS

3.1-3.4 Prohibited Placement Zones

6. INSTALLATION

6.1 Wiring Instructions

Details the crucial wiring procedures and safety precautions for installing the smoke alarm.

6.1.3-6.1.12 Interconnection and Wiring Rules

6.1.13 Terminal Markings and Warnings

6.1.14-6.1.16 Power and Interconnection Notes

6.2 Mounting Instructions

Provides step-by-step guidance on how to physically mount the smoke alarm to its base.

7. OPERATION, TESTING AND MAINTENANCE

7.1 Operation

7.2 False Alarm Hush Control Feature

Details the function and operation of the temporary desensitization feature for nuisance alarms.

7.3 Operating and Alarm Characteristics

8. BATTERY INSTALLATION, REPLACEMENT AND TEST

8.1 Battery Installation

Guides on how to install the 9V battery for backup power and low battery indication.

8.1.5 Approved Battery Types

8.1.6-8.1.7 Battery Handling Precautions

8.2 Battery Test

Outlines the procedure for testing the battery backup and alarm function.

11. THE LIMITATIONS OF SMOKE ALARMS

13. WHAT TO DO WHEN THE ALARM SOUNDS

13.1-13.7 Emergency Actions

15. WARNING: INSULATION TEST

15.1-15.3 Test Prohibition and Consequences

Strictly warns against performing insulation tests on circuits with smoke alarms due to damage and warranty voidance.