Need help?Do you have a question about the PSB imagine XA and is the answer not in the manual?
General| Tweeter | Yes |
|---|---|
| Magnet type | Neodymium |
| Speaker type | 2-way |
| Woofer diameter | 102 mm |
| Speaker position | Front |
| Tweeter diameter | 25 mm |
| Number of drivers | - |
| Speaker enclosure | Ported |
| Speaker placement | Floor, Tabletop/bookshelf |
| Audio output channels | 1.0 channels |
| Number of tweeter drivers | 1 |
| Tweeter diameter (imperial) | 1 \ |
| Impedance | 8 Ω |
| Sensitivity | 87 dB |
| Frequency range | 100 - 23000 Hz |
| RMS rated power | - W |
| Crossover frequency | 2000 Hz |
| Product color | Black |
| Recommended usage | Speaker set unit |
| Recommended amplifier power (max) | 80 W |
| Recommended amplifier power (min) | 10 W |
| Connectivity technology | Wired |
| Quantity per pack | 2 pc(s) |
| Package weight | 7100 g |
Weight and Dimensions| Depth | 265 mm |
|---|---|
| Width | 168 mm |
| Height | 173 mm |
| Weight | 2900 g |
Placement guide for a 5.1.2 Dolby Atmos system with two height speakers.
Explanation of Dolby Atmos configuration numbering (e.g., 5.1.2).
Placement guide for a 5.1.4 Dolby Atmos system with four height speakers.
Placement guide for a 7.1.4 Dolby Atmos system with four rear height speakers.
Ensures correct wiring polarity for optimal performance and safety.
Retain original packaging for product transport and future use.
Instructions for cleaning speaker cabinets using soft cloths and mild cleaners.
Guidance on cleaning speaker drivers and ports, avoiding physical damage.
Steps to troubleshoot distorted or fatigued speaker sound.
Steps to resolve issues with low or no volume output from speakers.
To Next Page
