Need help?Do you have a question about the PSR PAT DS350 and is the answer not in the manual?
Explains the operational logic and automatic tests of the LMI system.
Details the function and placement of the crane operator's console.
Identifies and describes the various controls on the operator's console.
Describes specific setup for pile driving, including bypass procedures.
Outlines the interactive process for inputting crane configuration data.
Allows quick selection of hoist drum during crane operation.
Enables direct adjustment for changes in crawler track position.
Programs audible and visual alarms for minimum and maximum working radius.
Programs audible and visual alarms for limitations on tip height.
Programs audible and visual alarms for upper and lower boom angle limits.
Displays the current system configuration, including boom and hoist details.
Allows adjustment of the LC display contrast for optimal visibility.
Details the procedure for installing the anti two-block retainer.
Details the procedure for removing and storing the anti two-block retainer.
Outlines daily inspection tasks for the LMI system components.
Introduces system malfunctions and error code indication.
Lists error codes and their corresponding malfunction descriptions.
Explains common operating errors and their causes/elimination.
Explains the necessity and purpose of calibration for crane configurations.
Specifies which crane configurations require calibration.
Lists the tools and materials needed for calibration procedures.
Describes how calibration data is stored and managed.
Details the procedure for setting zero points for sensors, requiring a service code.
Guides the user through setting up calibration based on the crane's current configuration.
Explains how to adjust the zero point of the force transducer.
Explains how to mechanically adjust and verify the angle sensor.
Step-by-step guide for calibrating the main boom of the crane.
Step-by-step guide for calibrating the jib of the crane.
Step-by-step guide for calibrating both the main boom and jib.
General| Brand | PSR |
|---|---|
| Model | PAT DS350 |
| Category | Industrial Equipment |
| Language | English |
To Next Page