OWNER’S MANUAL
Item Number W50036
WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this product. The
owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good working order. If the owner and/or operator are not fluent in English,
the product warnings and instructions shall be read and discussed with the operators’ native language by the
purchaser/owner or his designee. Make sure that the operator comprehends its contents. Safety information
shall be emphasized and understood prior to usage. The product shall be inspected per the operating
instructions.
Users of this product must fully understand these instructions. Each person operating this product must also
be of sound mind and body and must not be under the influence of any substance that might impair their
vision, dexterity or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
120V ELECTRIC ENGRAVER
3042597
SPECIFICATIONS:
5 Min. ON/5 min. OFF operating cycle
Motor: 120V 60hz, 0.2 AMP
Weight: 13 oz.
3,600 strokes per minute
Engraving bit: Tungsten carbide tipped steel
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE
To Next Page
Need help?
General