Need help?Do you have a question about the Ptek FM Series and is the answer not in the manual?
Details warranty coverage for parts and labor, damage exclusions, and return procedures.
Guidelines for grounding, fuses, and power application to prevent hazards.
Warnings against operation in hazardous atmospheres and unauthorized cover removal.
Caution regarding high RF voltages at the output connector and termination requirements.
Technical specifications for monaural audio input, response, and distortion.
General technical specifications including power output, frequency range, and modulation.
Environmental operating conditions such as altitude and ambient temperature.
Specifications for wideband inputs, input levels, and amplitude response.
Step-by-step instructions for making electrical connections to the exciter's rear panel.
Steps for performing a turn-on checkout, including meter readings and power calculations.
Statement regarding the device's compliance with FCC Part 15 rules.
Description of the functions and pin assignments for the accessory connector.
Wiring diagram detailing AC input and power supply unit connections.
Wiring diagram showing connections between modules P1, P2, and P3.
Detailed wiring diagram for the synthesizer and LED PCB connections.
Schematic showing connections to the Power Amplifier Module, including transformers and terminal blocks.
Schematic details for the current sense board and wiring to the LED PCB.
Schematic details for the -5V switching regulator and AGC circuits.
Schematic details for detector diode bias, temperature compensation, and metering circuits.
Schematic details for the RF output stage and FET bias circuits.
Schematic for 24V and -8V switching regulators and over-voltage protection.
Schematic for detector diode bias, temperature compensation, and metering circuits.
General| Brand | Ptek |
|---|---|
| Model | FM Series |
| Category | Transmitter |
| Language | English |
To Next Page