5.4.4. Use with http client
When using an HTTP client such as Internet Explorer, the ptf
3203A GlobalTyme serves up an intuitive web page with the control
and monitor functionality provided at the front panel and over the
RS232 port.
When connected to a standard web browser (Microsoft Explorer)
via the Ethernet interface the unit first does an authentication
procedure. It will ask for a user name and password for access.
The user name will always be admin, the password is whatever the
unit password is at that time. After authentication the unit serves up
the following web page.
PTF 3203a Web Interface
Enter the Command Number (Example A01)
If you leave the value empty, its current setting will be returned.
If you enter a value, you are setting that value for that command.
Refer to your manual for valid command numbers and their valid settings.
Or click this link Valid Commands
Command Number
Command Value
To Next Page
Loading...