What to do if PTS Diagnostics Diagnostic Equipment displays 'REPLACE BATTERIES'?
To address the 'REPLACE BATTERIES' error on your PTS Diagnostics Diagnostic Equipment, replace all the old batteries with new, high-quality AA batteries. The analyzer will not perform tests until the batteries are replaced.
How to fix 'EXPIRED LOT' error on PTS Diagnostics Diagnostic Equipment?
General| Test Parameters | Total Cholesterol, HDL Cholesterol, Triglycerides, Glucose, Ketone |
|---|---|
| Sample Type | Fingerstick whole blood |
| Display | LCD |
| Power Source | 4 AAA batteries |
| Dimensions | 5.5 x 3 x 1 inches (14 x 7.6 x 2.5 cm) |
| Operating Temperature | 10°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Warranty | 1 year |
Defines the system's purpose and target users.
Crucial safety guidelines for using the CardioChek Plus system.
Overview of the analyzer's components and how it works.
Explains the function and importance of the MEMo Chip.
Details about the different types of test strips available.
Details about test strips and their procedural limitations.
Instructions for installing, replacing, and managing batteries.
Guide to navigating the analyzer's menu structure and buttons.
Steps for configuring language, date, and time settings.
Guide to changing measurement units and sound preferences.
Guidance on managing wireless connectivity and printer setup.
Using check strips to verify analyzer operation and optics.
Step-by-step guide for using the analyzer check strip.
Explanation of quality control materials and their purpose.
Instructions for running QC tests on different strip types.
List of supplies and preparation for blood testing.
Detailed steps for collecting blood via fingerstick.
Procedures for running reflectance and electrochemical tests.
How to access and view test results stored in memory.
Steps to erase test results from the analyzer's memory.
FCC compliance and network compatibility information.
Connecting the analyzer to wireless networks for data transfer.
Guidelines for proper storage and handling of the analyzer.
Critical procedures for cleaning and disinfecting the analyzer.
Detailed steps for disinfecting the analyzer after use.
Table of common error messages and their solutions.
Guidance on assessing results, including out-of-range values.
Information on CLIA waiver and testing requirements for US labs.
Technical specifications of the analyzer and related accessories.
How to contact PTS Diagnostics for support and assistance.
Details of the analyzer's two-year limited warranty.
Explanation of symbols used on the analyzer and in documentation.
To Next Page