CLEANING: CHAMBER
13
1. Unscrew the chamber
from the base.
2. Light Cleaning:
Use a cotton swab to gently
remove any residue with
90%+ isopropyl alcohol.
3. Deep Cleaning:
Submerge the chamber
in 90%+ Iso for 20 minutes.
Never use water (iso only).
CLEANING: BASE
Preparation: Remove glass and chamber.
Gently clean the gold
contact points using cotton
swabs soaked in iso.
Clean the airpath between
the chamber and the glass.
Do not allow water into
the base at any time.
Do not handle if hot.
Iso is ammable, let it dry!
To Next Page
Loading...
