www.gruposanz.es
— 5 —
EN
PULMIC RAPTOR 7
5. CLEANING AND MAINTENANCE
1. After each use, always depressurize, empty and clean the tank, as well as the various
components of the sprayer.
2. If the nozzle or the nozzle filter is obstructed, clean them with clear water without using
metal objects that could cause damage.
3. If the handle is obstructed, remove it and clean the filter with water.
4. Store the sprayer under cover to avoid extreme temperatures.
Watch the product maintenance video through the following link or QR:
www.tiny.cc/maintenance-raptor7
6. PROBLEMS AND SOLUTIONS
Watch the videos of the main repairs through the following link or QR:
www.tiny.cc/troubleshooting-raptor7
7. WARRANTY
This product has a 2-year warranty from the user’s purchase (Minimum indicated by Spanish law)
of the product, except in countries where specific warranty conditions apply. If in doubt you can
ask your dealer.
No warranty will be applied for any of the following causes:
• Do not read the instruction manual carefully.
• Wear from conventional use (Including batteries).
• Use of work tools not allowed.
• Use of force, improper handling, or accident.
• Use of non-original or unsuitable spare parts.
• Use of products not allowed.
• Omission of necessary maintenance work.
Any type of guarantee must be dealt with by an authorized dealer, always together with the
purchase invoice or ticket specifying the date of purchase of the product and with its serial
number (photo of the serial number). Warranty services do not extend the warranty period
or establish new warranty terms. It is also recommended to register the machine through the
following link for a correct use of the guarantee. The data of the guarantee must be of the own
end user and not those of the seller.
8. TECHNICAL SPECIFICATIONS
Adjustable conical nozzle Ø 1.8 Lance length 470 mm
Flow at 3 bar 800 cc/min Strap length 1800 mm
Flow at 1 bar 450 cc/min Strap width 30 mm
Total tank capacity 6350 ml Filler width 130 - 45 mm
Maximum work capacity 5000 ml Minimum machine size 450 x 215 mm
High pressure insecticide 1.5 - 2.5 bar Units per m 54
Low pressure herbicide 1 - 1.5 bar Net weight 1350 g
Tank test pressure 10 bar Gross weight 1550 g
Quantity of product required to obtain a solution at:
1 % 50 ml 2 % 100 ml 3 % 150 ml 4 % 200 ml 5 % 250 ml
To Next Page
Loading...