PISA-B-812-B1
PISA-B-812-B4
Apr. 2021 / Rev. 0.1 DS-PISA-B-812-Bx-xx-EN www.pulspower.com 18 / 20
All parameters are specified at 24Vdc input voltage, 8x5A output currents, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
20. Approvals And Fulfilled Standards
IEC 61010 CB Scheme Certificate
IEC 61010-2-201 - Electrical Equipment for Measurement, Control and
Laboratory Use - Particular requirements for control equipment
IEC 62368
planned
CB Scheme Certificate
IEC 62368-1 - Audio/video, information and communication
technology equipment - Safety requirements
Output safety level: ES1
UL 61010 UL Certificate
Listed equipment for category NMTR - UL 61010-2-201 - Electrical
equipment for measurement, control and laboratory use - Particular
requirements for control equipment
Applicable for US and Canada
E-File: E198865
UL 2367 UL Certificate
Recognized component for category QVRQ - UL 2367 Standard for
Solid State Overcurrent Protectors
Applicable for US
E-File: E342020
VDMA 24364 Paint Wetting Impairment Substances Test (or LABS-Test)
Tested for Zone 2 and Test Class C1 according to VDMA 24364-C1-L/W
for solvents and water-based paints
21. Regulatory Compliance
EU Declaration of
Conformity
The CE mark indicates conformance with the European
– EMC directive
– RoHS directive
REACH Directive Manufacturer's Statement
EU-Regulation regarding the Registration, Evaluation, Authorization
and Restriction of Chemicals
WEEE Directive Manufacturer's Statement
EU-Regulation on Waste Electrical and Electronic Equipment
Registered in Germany as business to business (B2B) products.
RoHS (China RoHS 2) Manufacturer's Statement
Administrative Measures for the Restriction of the Use of Hazardous
Substances in Electrical and Electronic Products 25 years
To Next Page
Loading...
Need help?
General
