Removal & Fitment of Side Cover LH / RH
CAUTION : Remove cover as described
above, Otherwise the lugs may break.
11
Fitment of Side Cover LH
• Match slot provided on rear portion (C) of
‘Side Cover LH’ with the bracket located
on chassis & Slide (C) backward.
• Match Lug (B) provided on front portion of
‘Side Cover’ with the rubber grommet hole
provided on ‘Fuel Tank’. Press in the
cover.
• Match the ‘Side Cover Lock’ (A) properly
with the bracket provided on ‘Holder step
LH’ and Lock the ‘Side Cover’.
Removal of Side Cover LH
• Insert the key into the ‘LH cover lock’ (A)
and turn the key clockwise.
• Hold the cover with both the hands and
pull front portion (B) of the cover. Slide
rear portion (C) forward. Take out ‘LH Side
cover’.
A
B
C
Rubber
Grommet
Bracket
To Next Page
Loading...