Removal & Fitment of Side Cover LH / RH
12
Fitment of Side Cover RH
• Match slot provided on rear portion (C) of
‘Side Cover LH’ with the bracket located on
chassis and slide (C) backward.
• Match Lug provided on front side (B) of
‘Side Cover’ with rubber grommet hole
provided on ‘Fuel Tank’ and press in ‘Side
Cover RH’.
• Match ‘Side Cover’ properly with bracket
provided on ‘Air filter assly’ and fix it with
Screw (A).
Removal of Side Cover RH
• Remove the screw (A) securing the ‘Side
Cover RH’.
• Hold the cover with both the hands and
pull front portion (B) first. Slide (C) forward.
Take out ‘Side cover RH’.
CAUTION : Fit cover as described above
to ensure proper fitment.
A
B
C
Rubber
Grommet
Bracket
To Next Page
Loading...