Pulsar 135 LS - Removal & Fitment of Seat; Fitment of Seat - Front; Fitment of Seat - Rear

Removal & Fitment of Seat
13
Fitment of Seat - Front
• For fitment of Seat Front, match & insert
the bracket (‘1’ of Fig. ‘A’) of seat with slot
(‘2’ of Fig. ‘A’) provided below fuel tank
rear mounting on chassis. Push seat
towards fuel tank.
• Then press the seat at rear from top to
align lock bolt (‘3’ of Fig. ‘B’).
• Tighten the lock bolt.
Fitment of Seat - Rear
• For fitment of Seat Rear, match & insert
bracket (‘4’ of Fig. ‘C’) of seat with bracket
(‘5’ of Fig. ‘C’) provided on chassis.
• Push seat towards fuel tank & align lock
rod (‘6’ of Fig. ‘C’) & seat lock (‘7’ of Fig.
‘C’).
• Then press the seat in middle from top to
lock the seat.
Fig. A Fig. B Fig. C
1
2
3
4
5
6
7
CAUTION : Always fit Front seat first.