Periodic Maintenance Information
Spark Plug
• Remove spark plugs by using plug
spanner.
• Clean the spark plugs.
• Adjust the gaps if incorrect by bending
outer electrode carefully.
Spark Plug Gap : 0.6 to 0.7 mm.
Spark Plug (2 Nos.) : BOSCH OR
: CHAMPION
0.6 to
0.7 mm
Drive Chain Slackness
• Chain top edge to be kept between the
two mar k s d u rin g c hai n s lac k nes s
adjustment.
• Chain slackness will have to be adjusted
whenever required.
• Std. Chain slackness 25 ~ 35 mm.
• Marking on chain adjusters should be
identically positioned on both sides.
25
Std. Chain
slackness : 25~35 mm
To Next Page
Loading...