Pulsar ACCOLADE 2 LRF XP50 PRO - Main Menu Functions; Quick Menu Functions

7
Image Detail Boost
TheImage Detail Boost function increases the sharpness of the contours of heated objects, which
increases their detail. The result of the function depends on the selected mode and observation conditions:
the higher the contrast of objects, the more noticeable the effect. This option is enabled by default, but can be
disabled in the main menu.
Status Bar
1 2 3 4 5 6 7
The status bar is located in the lower part of the display and shows information on the actual operating status
of the device, including:
1. Color palette (shown only if thepalette is selected)
2. Observation mode
3. Calibration mode (in the automatic calibration mode, three seconds before automatic calibration a
countdown timer
is shown in place of the calibration mode icon).
4. Current full magnication (for example, 2.5x)
5. Wi-Fi connection status
6. Time
7. Power indication:
- Battery charge level
(if the device is powered by the Battery Pack).
- External battery power indicator
(if the device is powered by an external power supply).
Quick Menu Functions
The quick menu allows change of basic settings such as display brightness and contrast, smooth digital zoom.
•
Enter the menu with a short press of thebutton.
•
To toggle between the functions below, press successively thebutton.
- Brightness
– press briey theUP (2)/DOWN (5)buttons to change display brightness from 0 to 20.
- Contrast
– press briey theUP (2)/DOWN (5)buttons to change display contrast from 0 to 20.
- Smooth digital zoom
– press theUP (2)/DOWN (5)buttons to change digital zoom from 2.5 to 20. Smooth
digital zoom is in 0.1x increments.
 
– it allows you to select one of the three observation modes as a base for the User
mode.
•
To exit quick menu, press and hold down thebutton or wait 5 sec for automatic exit.
Main Menu Functions
Enter the Main Menu
•
Enter the main menu with a long press of thebutton.
•
Press theUP (2)/DOWN (5)buttons to switch between the menu options.
•
Enter a menu option with a brief press of thebutton.
•
Exit the menu with a long press of thebutton.
•
Automatic exit takes place in 10 sec of inactivity (buttons are not pressed).

Tab 1 Tab 2
Wi-Fi activationMenu
Rocks
Identification
Forest
Automatic
Semi-Automatic
Manual
A
SA
M
Black Hot
Red Hot
Red Monochrome
Rainbow
Ultramarine
Violet
Sepia
User
On
On
Language
Date
Clock
Unit of
measurement
Reset
Format
General settings
Menu
10
On
Off
Reticle shape
TPA function
THD function