Need help?Do you have a question about the Pulsar Helion XQ50F and is the answer not in the manual?
General| Frame Rate | 50 Hz |
|---|---|
| Detection Range | 1800 m |
| Lens | 50 mm |
| Thermal Sensitivity | < 40 mK |
| Battery Life | up to 8 hours |
| Pixel pitch | 17 µm |
| Display Type | AMOLED |
| Display Resolution | 1024 x 768 |
| Built-in Memory | 16 GB |
| Protection Level | IPX7 |
| Spectral Range | 8 - 14 µm |
| Waterproof Rating | IPX7 |
| Video/Photo Recording Format | MP4, JPG |
| Operating Temperature | -25°C to +50°C |
| Sensor Type | Uncooled VOx |
| Resolution | 384x288 pixels |
| Storage Temperature | -40°C to +60°C |
Details the function of each button for different operating modes and press types.
Step-by-step instructions for charging the HELION battery pack.
Important safety precautions for handling and charging the battery pack.
Instructions for turning on the device and adjusting image focus and display.
Explanation of manual, semi-automatic, and automatic sensor calibration.
Method for identifying and repairing defective pixels on the sensor.
Using the built-in recorder for video and photo capture.
Estimating the distance to an object using the built-in rangefinder.
Lists common problems and their corrective actions for the thermal imager.
To Next Page
