Why Pulsar Air Compressor motor will not run?
- RRebecca WelchJul 27, 2025
The motor may not run due to several reasons. It could be due to a blown fuse or tripped circuit breaker; in this case, replace the fuse or reset the breaker. Also, check the bleeder valve and replace it if it doesn't open. Other potential causes include a clogged hose (check for proper system pressure), an incorrect wire gauge in the extension cord (ensure the proper gauge), or an incompatible motor with the existing cord (use the correct fuse or circuit specified). If there is reduced air passage, contact an authorized service center.