Pulsar W650 - Memory Recall During Measurement

13
oldest measurement stored in memory is displayed.
2. Wity each depression of button “D”, the stored data are recalled
successively from the oldest to the newest.
[Memory recall during measurement]
1. Depress button “B” to show the memory recall display. The
newest measurement stored in memory is displayed.
2. With each depression of button “D”, the stored data are recalled
successively from the oldest to the newest.
Note: Even if the digits are reset to “00” in the stopwatch
measurement, stored data is not erased and can be recalled
unless a new measurement is started.