Pulsar W650 - Preset Timer Operation; Preset Timer Control Sequence

16
C
C
Restart Warning
sound
beeps.
Time-up
Stop
C
Start
Preset timer operation
Depress buttons in the following order.
C
Stop Reset
D
Restart and stop of the timer can be
repeated by depressing button “C”.
* When the set time is up, a warning sound beeps for 5 seconds
as the display is illuminated. To stop them manually, depress
mode selector “A”, or depress button “B”, “C” or “D” or the
light button.
Notes:
1. After the countdown is repeated 99 times, the number of
times the countdown is repeated is displayed in two digits
such as “00” for 100, “01” for 101, and so on.
2. Once the timer is set, the set time is retained and can be used
repeatedly unless it is readjusted.