Need help?Do you have a question about the Pulse Shower Spas 1055-SSB and is the answer not in the manual?
General| Model Number | 1055-SSB |
|---|---|
| Body Material | Stainless Steel |
| Shower Head Type | Rainfall |
| Hand Shower | Yes |
| Jets | 6 |
| Integrated Diverter | Yes |
| Thermostatic Valve | No |
| Installation Type | Wall Mount |
| Spray Patterns | 3 |
| Flow Rate | 2.5 GPM |
| Product Type | Shower Panel |
| Finish | Brushed |
Confirm position for the mounting base and standing place. Dig hole based on mounting base size.
Connect hot and cold water pipes to the mounting base. Ensure no leaks.
Ensure mounting base is vertical and centered. Tighten with metal screws.
Discard mounting base cover and plugs for hot and cold water outlets. Cut extra top part.
Insert bottom shower pipe to mounting base and secure with screws.
Insert top shower pipe into bottom pipe. Connect hose to swivel joint and handshower.
Blot dry water, use auto spray wax, and clean with a damp, nonabrasive sponge.
Warranty does not cover freezing. Consult plumber for proper waste valves.
Product free from defects for original consumer purchaser as long as they own the home.
Pulse will repair, replace, or refund the purchase price at its option.
Excludes failures from improper installation, use, modifications, or accident.
Pulse is not liable for consequential damages; liability limited to purchase price.
To Next Page