Need help?Do you have a question about the Pulse Shower Spas 1056-BN and is the answer not in the manual?
General| Product Type | Shower System |
|---|---|
| Model Number | 1056-BN |
| Finish | Brushed Nickel |
| Installation Type | Wall Mounted |
| Material | Brass |
| Number of Shower Heads | 1 |
| Hand Shower | Yes |
| Diverter | Yes |
| Flow Rate | 2.5 GPM |
| Spray Patterns | Multiple |
| Hose Length | 60 inches |
| Warranty | Limited Lifetime |
Remove the existing shower arm and showerhead from the wall.
Slide escutcheon onto nipple, apply tape, insert nipple into plumbing, and secure the arm.
Thread the showerhead onto the shower arm.
Apply glue to the holder, secure to wall with tape, and let it cure for 48 hours.
Insert washers into hose, connect to swivel joint and handshower, then place into holder.
Illustrates and names the different spray functions: Waterfall, Rain Showerhead, and PowerShot.
Details what defects are covered and the duration of the warranty for different purchasers.
Outlines Pulse's options for repair, replacement, or refund and the process for submitting claims.
Lists conditions under which the warranty does not apply, such as improper installation or misuse.
Explains the warranty duration for repaired or replaced products.
States that other warranties are disclaimed and limits Pulse's liability for damages.
To Next Page