3
Pulse Four Channel 2x 100W Mixer Amplifier
Designed for use in small to medium venues the PMH200 mixer amplifier is ideal for sound reinforcement of vocals or music.
When coupled with a pair of speakers this will suffice for rehearsal rooms, small to medium band gigs, small school halls or
presentations.
This unit includes a host of features, along with an impressive list of specifications, which are detailed over the next pages.
Please take the time to read this document completely prior to installation of this product. Should you have questions
regarding installation or operation of this unit, please contact your Pulse Retailer or Pulse Technical Support.
Features
• Four channel mixer amplifier
• Rugged, carpet covered housing complete with steel corner guards and rubber covered carry
handle
• Balanced XLR microphone inputs
• ¼” 6.35mm line level inputs
• CD/TAPE input located on rear panel
• Master Volume & Effects controls
• Combi output sockets – accept either 6.35mm (¼”) jack plugs or standard locking speaker plugs
• Effects loop – enables use of external processing
• Record output – ideal for use with external audio recorders
• 3 Band EQ on main output
• 2 Band EQ on each input channel
• Convection cooled – no fan noise
• 2x 75Wrms (2x 100W peak) power output
Connections & Controls:
NOTE:
Before connecting or disconnecting any cables, microphones or instruments it is good practice to
turn down all level controls and where possible switch off the mixer amplifier. This will prevent any pops,
clicks or bangs that could damage either the speakers and/or damage the mixer amplifier. Main’s cords
and speaker cables should be connected/disconnected with the power switched off.
To Next Page
Loading...