8 Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.
Repair and Maintenance
Tools required: 4 mm hex wrench, 5 mm hex wrench, two [2] 13 mm wrenches, 10 mm wrench, phillips screwdriver
Chain and Rear Wheel Replacement
1. Using a 4 mm hex wrench remove the 2
bolts from the rear chain cover on side of the
scooter.
3. Note the location of all rear wheel hardware and ensure to properly reinstall all items.
2. Using two [2] 13 mm wrenches loosen the
rear wheel axle nuts. CAREFULLY remove
the wheel AND axle from the frame, with the
wheel remaining on the axle.
To Next Page
Loading...
