Need help?Do you have a question about the PulseTech 390PT and is the answer not in the manual?
General| Brand | PulseTech |
|---|---|
| Model | 390PT |
| Category | Measuring Instruments |
| Language | English |
Key information regarding the battery analyzer's testing capabilities and operating environment.
Critical safety instructions for handling lead-acid batteries and using the tester to prevent hazards.
Ensuring proper ventilation and cleaning battery terminals before testing.
Inspecting battery case, adding distilled water, and avoiding overfilling.
Procedure for removing battery terminals safely when testing outside the vehicle.
Step-by-step guide for connecting the tester and performing a battery test.
Choosing battery test, type, rating, and capacity via the tester interface.
Understanding the different test results like GOOD & PASS, BAD & REPLACE, and LOAD ERROR.
Starting the system test by pressing ENTER and confirming cranking voltage status.
Assessing alternator output at idle, identifying issues like low or high charging voltage.
Evaluating alternator performance under accessory load and engine RPM conditions.
Definitions for GEL, AGM, and VRLA batteries.
Explanations of STATE OF HEALTH, STATE OF CHARGE, CCA, and AMPERE-HOUR.
To Next Page