pumpa PC-58 - English EU Declaration of Conformity

CZ/SK/EN
30
15 EU Declaration of conformity
Translation of the original EU Declaration of conformity
Product model: PC-18(1), PC-58(2), PC-59(2)
Manufacturer: PUMPA,a.s. U Svitavy 1, 618 00 Brno, Czech Republic, ID No.: 25518399
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Subject of the declaration: flow sensor (1), pressure sensor (2)
The object of the declaration described above is in conformity with the following harmonisation legislation of
the European Union: Directive 2014/35/EU and Directive 2014/30/EU
The harmonised standards on the basis of which conformity is declared have been used:
EN 60730-1 ed.4: 2017
EN 60730-2-6 ed.3: 2016
EN 55014-1 ed.4: 2017
EN 55014-2 ed.2: 2017
EN 61000-3-2 ed.5: 2019
EN 61000-3-3 ed.3: 2014
Declaration of conformity issued on 17. 12. 2020 in Brno
ES/PUMPA/2019/001/Rev.1