Punktal MFA 604 - Installation and Connection

Installation and connection
• Product can only be installed and connected
in accordance with the statutory installation
rules.
Electrical connection
Connect the product to a grounded outlet/line
protected by a fuse of suitable capacity as stated
in the "Technical specifications" table. Have the
grounding installation made by a qualified
electrician while using the product with or
without a transformer. Our company shall not be
liable for any damages that will arise due to
using the product without a grounding installation
in accordance with the local regulations.
• Connection must comply with national
regulations.
• The mains supply data must correspond to
the data specified on the type label of the
product. Open the front door to see the type
label.
• Power cable of your product must comply
with the values in "Technical specifications"
table.
Plug the power cable into the socket.
Installing the product
1. Slide the oven into the cabinet, align and
secure it while making sure that the power
cable is not broken and/or trapped.
DANGER:
Before starting any work on the
electrical installation, disconnect the
product from the mains supply.
There is the risk of electric shock!
DANGER:
The product must be connected to
the
mains supply only by an authorised
and
qualified person. The product's
warranty period starts only after
correct
installation.
Manufacturer shall not be held responsible
for damages arising from procedures
carried out by unauthorised persons.
DANGER:
The power cable must not be clamped,
bent or trapped or come into contact
with hot parts of the product.
A damaged power cable must be replaced
by an Authorised Service Agent. Otherwise,
there is risk of electric shock, short circuit
or fire!
Power cable plug must be within easy
reach
after installation (do not route it above the
hob).