PupGear Original doggydocks User Manual

INSTALLATION
INSTRUCTIONS
PAGE 1
PAGE
1
Original doggydocks®
Jumbo doggydocks®
Installing Stabilizer Bars:
Fold the doggydocks until the
middle hinge is visible.
Place the round dowel in
the fold of the second hinge.
Straighten out the doggydocks
and center stabilizer bars with
hinge. Press firmly to make sure
board is locked.
3/8”
Folding doggydocks®
doggydocks® Models
Screw Eye Hook
to side of board
Adjust length of rope
for proper float angle.
Floatation Buoys
For Jumbo doggydocks
®
Stabilizer Bars
(For Folding Model
and Extension Kit)
Installation Steps
1. Install Mounting Kit on Dock, Boat or Swim Platform.
2.
Place Snapbag on Underside of doggydocks.
(See Instructions Page 2)
Place Dowel and stabilizers bars on folding models.
3. Attach Extension Kit using Stabilizer Bars and Supplied Screws.
4. Install Eye Screws to Side of the doggydocks Board.
5.
Use stabilizer bars to join
doggydocks and
extension piece. Install
screws in pre-drilled
holes.
®
doggydocks®
Extension
See page 3 for proper
attachment
Snapbag™
for All Models
3/8” Dowel for
Folding Model-Place
Inside Second Hinge
NOTE:
Stabilizer Bars Do Not Float!
We recommend securing
with a strap when in use.

PupGear Original doggydocks Specifications

General

Brand	PupGear
Model	Original doggydocks
Category	Boating Equipment
Language	English

Summary

doggydocks Models and Extension

Original, Folding, and Jumbo Models

Overview of different doggydocks® models.

doggydocks Extension Kit

Instructions for attaching the extension.

Installation Steps

Mounting Kit and Stabilizer Bars

Steps for mounting and using stabilizer bars.

Extension Kit and Hardware

Attaching extension, eye screws, and snapbag.

Setting Up doggydocks for First Time

Angle and Slope Considerations

How distance and slope affect setup.

Safety and Usage Cautions

Important safety warnings and usage advice.

Adjusting Floatation Angle

Snapbag Positioning by Weight

Guide for Snapbag placement based on dog weight.

Water Placement and Final Adjustments

Placing the unit and fine-tuning the angle.

Swivel Cleat Installation

Securing the doggydocks

Steps to attach the unit to a swivel cleat.

Quick Release Mounting Kit

Hardware Installation Steps

Detailed guide for installing the mounting hardware.

PupGear Warranties and Return Policy

Product Warranties and Support

Information on product guarantees and help.

Return Policy and Disclaimer

Guidelines for returns and liability limits.