Instructions for Use:
1
2
3
4
5
6
Soak the filter in cold water for 15 minutes.
Hand wash pitcher, lid, pour tray and removable filter cover (select models only) with
mild soapy water. Rinse well.
Hold filter under cold running tap water for 10 seconds. Allow excess water to drain.
Attach removable filter cover (select models only). Twist counterclockwise to lock.
Insert the filter into the pour tray and
push down and twist clockwise to lock.
Fill pour tray with cold water. Do not use hot
water. Allow the pour tray to completely
drain into the pitcher or dispenser reservoir.
For Optimal Use, Care and Safety
• Use cold water only. DO NOT use with water above 82°F/28°C as this may damage the filter.
• Wash dispenser CleanSensorTM Monitor under running water, do not submerge.
• DO NOT use with water that is microbiologically unsafe, or of unknown quality, without
adequate disinfection before or after the system. Individuals requiring water of a certain
microbiological purity should consult their physician.
To Next Page
Loading...
