Pure Acoustics AV-1080 User Manual

Follow all safety and operating instructions before use to avoid fire or electric shock.

Do not remove covers, expose to liquids, or use with wet hands to prevent electric shock.

Guide to setting up a 5-speaker surround sound system for optimal audio experience.

Position front speakers normally, centre higher/lower than TV, and surrounds behind you.

Ensure front speakers have 8-16 Ohm impedance, centre/surround speakers also 8-16 Ohm.

Visual guide for connecting audio sources, speakers, and power to the receiver.

Guidelines for correct speaker wire gauge, polarity, and preventing short circuits.

Properly connect speaker terminals to wires, ensuring correct gauge and insulation.

Detailed description of each button and jack on the receiver's front panel.

Explanation of all input/output jacks and speaker terminals located on the rear panel.

Introduction to all buttons and their functions on the provided remote controller.

Steps for selecting audio sources, adjusting volume, treble, bass, and mute.

Instructions for using microphone inputs, adjusting volume, tone, and echo.

How to use the radio function, scan channels, and memorize stations.

Solutions for common problems like no display, no sound, or incorrect playback.

Technical details including output power, frequency response, and general requirements.

List of accessories provided with the unit, such as manual, remote, and antenna.