EasyManua.ls Logo

Pure Reliability PILOT 150 PR-2150 - User Manual

Pure Reliability PILOT 150 PR-2150
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PILOT 150
PR-2150
This product manual contains important information about the safe installation and
use of this projector. Please read and follow these instructions carefully and keep this
manual in a safe place for future reference.
PEARL RIVER LIGHT & ACOUSTICS INDUSTRIAL LTD.
Yingbin Road, Dashi Panyu, Guangzhou, 511430 China
http://www.pr-lighting.com

Questions and Answers

  • M
    Michael MayAug 1, 2025
    Why does the beam appear dim on my Pure Reliability DJ Equipment?
    • A
      Ashley PenningtonAug 2, 2025
      If the beam from your Pure Reliability DJ Equipment appears dim, it could be due to dust or grease on the optics. Ensure the optics are clean. Alternatively, the lamp may be nearing the end of its life; if so, replace it with a new lamp of the specified type and rating.
  • B
    Brett LambertAug 6, 2025
    How to fix a Pure Reliability DJ Equipment projector that doesn’t switch on?
    • K
      Kristie JonesAug 6, 2025
      If your Pure Reliability DJ Equipment projector doesn’t switch on, the issue might be with the power supply. Check the fuse on the power socket. Alternatively, the lamp might not be working, in which case you should replace it.
  • A
    Alex ShortAug 11, 2025
    What to do if projected image appears to have a halo on Pure Reliability PILOT 150 PR-2150 DJ Equipment?
    • R
      Robert BraunAug 11, 2025
      If the projected image from your Pure Reliability DJ Equipment appears to have a halo, the lamp might not be installed correctly. Make sure the lamp is installed correctly. Also, check for dust or grease contamination on the optics and carefully clean the optical group lenses and the projector components if needed.
  • M
    Mary HunterAug 17, 2025
    Why is my Pure Reliability PILOT 150 PR-2150 DJ Equipment projector only working intermittently?
    • C
      Christopher CainAug 17, 2025
      If your Pure Reliability DJ Equipment projector only functions intermittently, the fan may have failed. Make sure the fan is working and not dirty.
  • S
    sanderskathrynAug 21, 2025
    What to do if Pure Reliability PILOT 150 PR-2150 projector doesn’t respond to the controller?
    • J
      Jasmine BrightAug 21, 2025
      If the lamp comes on but the Pure Reliability DJ Equipment projector doesn’t respond to the controller, the issue might be with the DMX configuration or start address. Ensure the projector is correctly configured. Another potential cause is a defective DMX cable; try replacing or repairing the DMX cable.
  • K
    Kristen JonesAug 27, 2025
    How to troubleshoot defective projection on Pure Reliability DJ Equipment?
    • W
      wangjohnAug 27, 2025
      If you notice defective projection with your Pure Reliability DJ Equipment, it could be due to a broken lens. Check the lenses to ensure they are not broken. Another possible cause is dust or grease on the lenses, which you should remove.

Summary

Safe Usage of the Projector

Installing the Projector

Fitting the Lamp

Power Supply and Mains Connection

Control Connections

DMX Terminator

Projector Configuration Setup Options

Projector DMX Start Address

DMX Control Channel Functions

Stand-Alone Mode Operation

Maintenance

Changing the Gobos

Lubrication

Keeping the Projector Clean

Troubleshooting

Technical Data

Light Output

Electrical Diagram

Component Order Codes

Pure Reliability PILOT 150 PR-2150 Specifications

General IconGeneral
BrandPure Reliability
ModelPILOT 150 PR-2150
CategoryDJ Equipment
LanguageEnglish