Need help?Do you have a question about the Pure Water Whisper 60 and is the answer not in the manual?
General| Brand | Pure Water |
|---|---|
| Model | Whisper 60 |
| Category | Water Pump |
| Language | English |
Important points to consider before installing and operating the Whisper system.
Warning regarding performance impact from temperature and salinity variations.
Detailed explanation of the scientific principles behind reverse osmosis.
Details on where and how the Whisper systems can be used, including advantages.
Details on the Quality Monitor, its display, and operation for product water quality.
Key performance metrics including weight, power consumption, flow rate, pressure, salinity, and temperature range.
List of materials needed for installing the Whisper 60 modular system.
Crucial safety warning to disconnect power before working on the electrical system.
Step-by-step guide for connecting the battery, motor, and control cables to the electrical box.
Procedure for filling and starting the Whisper system, including valve operation and initial checks.
Procedure for flushing the system with fresh water to prevent biological growth and fouling.
Step-by-step guide for performing a freshwater flush, including selector valve operation and pre-filter change.
Detailed steps for preserving the RO unit for extended periods, including chemical use.
Information about the food-grade preservative chemical and its safe handling.
Instruction to change the pre-filter cartridge before restarting the system after long-term storage.
Step-by-step guide for replacing the RO membrane, including seal preparation and greasing.
Instructions for opening pressure vessels, handling seals, and greasing connections.
Diagram illustrating the electrical connections for 12/24V DC units.
Details on connecting the 12/24V motor, emphasizing correct polarity to avoid damage.
To Next Page