4
Pull the plastic tab from
the remote control
battery compartment
and remove the
protective film from
remote buttons.
Press and on the remote to view the
available languages (English/French/German/
Italian) used for displaying menus and options
and press Select to confirm your choice.
Fully extend the aerial.
Getting started
Setting up
LANGUAGE
Insert the connector of the
mains power adapter into
the socket on the rear of the
radio.
Attach the appropriate
adapter pins for your region,
if required and plug in to the
mains supply.
4
1 2
3
4
Wait for Contour 100Di to complete an
autotune, which finds all available digital
stations (this takes about one minute).
When the autotune is complete, a digital
station will be selected.
4
5
SCAN 26
DR
DR
bBC R2
To Next Page
Loading...
