Jongo S3 Safety Instructions
1. Read these instructions – All the safety and operating instructions should be read before this
product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future
reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Clean only with dry cloth.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Unplug the apparatus during lightning storms or when unused for long periods of time.
9. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, does not operate normally, or has been dropped.
10. To reduce the risk of electric shock, do not remove plastic cover or screws unless instructed
by the user guide as there are no user‑serviceable parts inside. Refer servicing to qualified
personnel.
11. Use only power supplies listed in the user instructions (with model no.ZDD090150,
manufactured by Pure.
12. Avoid liquids getting into Jongo. Should not be immersed in water, or used where this may
happen, such as a bathroom.
13. The equipment’s ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table‑cloths, curtains etc.
14. WARNING Please refer to the information on the bottom exterior of the enclosure for electrical
and safety information before installing or operating the apparatus.
15. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled
with liquids, such as vases, shall not be placed on apparatus.
16. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
17. WARNING: The direct plug‑in adapter is used as disconnect device, the disconnect device shall
remain readily operable.
18. This equipment is a Class II or double insulated electrical appliance. It has been designed
in such a way that it does not require a safety connection to electrical earth.
19. Mains power supply:
Switching adapter: Input: AC 100 ‑ 240 V~, 50/60 Hz, 0.5 A; Output DC 9V 1500mA;
Main unit: DC 9V , 1500mA
To Next Page
Loading...
Need help?
General
Weight and Dimensions
