PURE Jongo S3 User Manual

Adding another Jongo to your network?
1. Switch on your new Jongo.
2. Press and hold the Wi-Fi button on any Jongo
that is already connected to your network until
the Power light pulses green.
3. Press and hold the Wi-Fi button on the back
of the new Jongo until the Power light pulses
green.
After around 30 seconds, the Power lights on both
Jongos will light steady green to confirm that the new
Jongo is connected to your network.

PURE Jongo S3 Specifications

General

Speaker type	-
Woofer diameter	88.9 mm
Tweeter diameter	19.05 mm
Number of drivers	4
Number of speakers	1
Audio output channels	1.0 channels
Certification	CE, US FCC/ETL, C-Tick, ETSI EN 300 401
Recommended usage	Mobile phone / Smartphone
Audio formats supported	AAC, MP2, MP3, WMA
Subwoofer included	Yes
Impedance	- Ω
Frequency range	- Hz
RMS rated power	20 W
Product type	Mono portable speaker
Product color	White
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	AC, Battery

Weight and Dimensions

Depth	139 mm
Width	131 mm
Height	135 mm
Weight	1000 g