PURE Jongo T4 User Manual

EN
9
Troubleshooting
Why does the power light on my Jongo change color?
The power light on the front of Jongo is used to tell you about Jongo’s status. The list
below explains some of the common colors that you may see when setting up and using
your Jongo.
Green (steady): Jongo is ready to play your music or is already playing a track.
Green (pulsing): Jongo is in Wi-Fi setup mode (you’ll see this when powering up your
Jongo for the first time) or Jongo is busy. The power light will turn steady green when
Jongo is ready to play your music.
Amber (steady): Jongo is in sleep mode. Jongo will automatically wake up and play music
when you try to play a track from your smartphone or tablet.
Red (flashing): Jongo cannot connect to your Wi-Fi. Check that you are within range of
your Wi-Fi network and that you have entered the correct password (matching any upper
and lower case letters) and run Jongo Setup again. To get more help with setting up your
Wi-Fi, visit our support site at support.pure.com/us.
Jongo_T2_T4_QSG-Bear-US-v1.indb 9 9/2/2014 11:32:19 AM

PURE Jongo T4 Specifications

General

Number of drivers	-
Number of speakers	1
Audio output channels	- channels
Impedance	- Ω
Frequency range	- Hz
RMS rated power	50 W
AUX in	Yes
Bluetooth profiles	A2DP
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product color	Black
Volume control	Digital
Built-in display	No
Certification	CE, US FCC/ETL, C-Tick, ETSI EN 300 401
Recommended usage	Universal
Audio formats supported	AAC, MP2, MP3, WMA
Power source type	AC

Weight and Dimensions

Depth	146 mm
Width	305 mm
Height	165 mm
Weight	3000 g