EasyManua.ls Logo

PureFlow Brio Premier - Safety Precautions; Grounding Safety Precautions and Instructions; Child Safety; Installation and How to Use

Default Icon
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
SAFETY PRECAUTIONS
Follow basic safety precautions when using this appliance, including:
Keep all gasoline or other ammable vapors and liquids away from this ltration unit and other appliances.
Unplug the unit before cleaning.
The unit heats water to a temperature above 194º F (90º C). Water temperatures above 125º F (52º C) can cause severe
burns or death from scalding. Most at risk of being scalded are children, people with disabilities and the elderly.
Follow proper grounding safety precautions and instructions prior to plugging in the unit (see GROUNDING SAFETY
PRECAUTIONS AND INSTRUCTIONS below).
Supervise children when using the unit (see CHILD SAFETY below).
GROUNDING SAFETY PRECAUTIONS AND INSTRUCTIONS
WARNING: The dispenser must be grounded. If the appliance is improperly grounded,
the result could be electric shock.
Ensure that the available power supply matches the unit’s voltage specications indicated on the nameplate label
(located at the rear). Ensure that the unit is set up so access to the power outlet and plug is unobstructed.
IMPORTANT: To provide additional protection from the risk of shock, the dispenser must
be connected to a ground fault circuit interrupter (GFCI) outlet at all times. Use of an
extension cord will void any warranties. See warranty document for complete terms
and conditions.
CHILD SAFETY
CAUTION: Supervise children when using the dispenser.
The hot faucet is equipped with a child safeguard that reduces the risk of hot water being
dispensed accidentally or by small children. To dispense hot water, press the hot water
safety button. Do not allow children to hang, climb or stand on the unit; the unit could fall
over and the child could be injured.
INSTALLATION AND HOW TO USE
This ltration unit must be installed and maintained by a water ltration service technician.
To dispense cold water, place a cup under the cold water faucet and press the lever.
To dispense hot water, place a cup under the hot water faucet and press the hot water safety button. Be careful not to
get burned by the hot water. When you release the button, the lever and safety button will return to its original state.