Pureit Marvella RO+UV

Questions and Answers

J
Joshua RiversJul 27, 2025
Why does the water from my Pureit Water Filtration System taste bad?
- T
  Thomas SmithJul 27, 2025
  If the water from your Pureit Water Filtration System tastes unusual, several factors could be responsible. First, the storage tank might need cleaning. Clean the storage tank after removing the water with a mild hypochlorite solution. Also, water stored too long can affect the taste; drain the old water and refill with fresh water. Finally, the filters or membranes may need replacement or cleaning; contact the Pureit Helpline for assistance.
P
peter26Aug 6, 2025
Why is my Pureit Water Filtration System taking so long to purify water?
- K
  Karen GarzaAug 6, 2025
  Several factors can cause your Pureit Water Filtration System to take longer than usual to purify water. Make sure that the ball valve is completely open to ensure unrestricted water flow. Additionally, the filters or membranes may require replacement or cleaning. Please contact the Pureit Helpline for assistance.
V
Victor ParkerAug 16, 2025
What to do if the storage tank of my Pureit Water Filtration System is not getting filled?
- D
  Danielle NelsonAug 16, 2025
  If the storage tank of your Pureit Water Filtration System isn't filling, check a few things. First, ensure the ball valve is open. Also, check if any of the 'Change SF,' 'Change GKK-1,' or 'Change GKK-2' indicators are red, which means the filters/membranes need replacing. If you notice any leakage from the purifier, contact the Pureit Helpline for assistance. Finally, the filters or membranes may need to be replaced or cleaned; please contact the Pureit Helpline.

Summary

Welcome to the Pureit Family

Unique Features of Pureit Marvella RO+UV

Advance Alert System

Alerts 15 days before Germkill Kit life ends, with Auto Shut Off feature.

Advanced 6-Stage Purification

Utilizes RO+UV technology for comprehensive water purification.

100% RO and UV Purification

Ensures all water passes through RO and UV for complete removal of contaminants.

TDS Modulator for Mineral Addition

Adds essential minerals post-purification to enhance water taste.

High TDS Removal Capacity

Transforms hard water (up to 2000 ppm) into soft, sweet water.

Large 10 Litre Storage Tank

Provides purified water availability even during power outages.

Advanced Voltage Fluctuation Guard

Protects against voltage fluctuations from 100-300 VAC.

Break-Resistant Tap

Durable tap tested for 50,000 cycles, ensuring longevity.

No Annual Maintenance Contract

Payment for maintenance is required only when services are needed.

Know Your Pureit Marvella RO+UV

Component Identification Diagram

Visual guide to identify all parts of the Pureit Marvella RO+UV purifier.

Technical Specifications

Pureit Marvella RO+UV Purifier Specifications

Detailed technical data including dimensions, flow rate, and filter types.

Germkill Kit Component Details

Specifications and materials for Sediment Filters, RO Membrane, and TDS Modulator.

Pureit Marvella RO+UVs Unique Technology

Pre-Sediment Filter Function

Removes particulate impurities and enhances carbon filter life.

Pre-RO Carbon Filter Benefits

Removes chlorine, pesticides, and improves taste/odor.

Post-Carbon Sediment Filter Role

Removes fine dirt and improves RO membrane lifespan.

RO Membrane Purification

Removes dissolved salts, heavy metals, and microbes.

UV Reactor for Inactivation

Additional purification stage to inactivate bacteria and viruses.

Post-RO Carbon Filter Polishing

Final stage to polish water and enhance taste.

TDS Modulator for Mineral Enrichment

Adds essential minerals to the purified water.

Installation and Important Instructions

Wall or Tabletop Installation Options

Guidance on positioning the purifier as a wall-mount or tabletop unit.

Safe Electrical Placement

Avoid installation above electric sockets and use provided plug.

Professional Installation Requirement

Emphasizes installation by a trained Pureit technician for safety.

Prohibition of Hot Water Connection

Pureit Marvella RO+UV should not be connected to any hot water tap.

Inlet Connection and Pipe Bends

Ensure purifier is near the inlet, avoiding sharp pipe bends.

Placement Away from Sunlight

Install away from direct sunlight and ensure adequate ventilation.

Water Pressure Management

Input pressure requirements (5-30 PSI) and accessory needs.

Waste Water Pipe Positioning

Ensure waste water pipe is placed lower than the purifier tap.

Cleaning and Maintenance

Tap Cleaning and Disinfection

Clean tap with disinfectants; discard water after cleaning.

Exterior Surface Cleaning

Use a wet cloth only for external cleaning; avoid soap or detergent.

Care for Decorative and Display Parts

Avoid extensive rubbing on decorative and LED parts to prevent scratches.

Shutdown for Extended Absences

Switch off Ball Valve and electrical power when leaving for long periods.

Leakage Protocol

Turn off Ball Valve and power if leakage occurs; check fitment.

Prohibition on User Servicing

Do not open purifier; servicing must be done by qualified personnel.

Waste Water Handling

Do not drink waste water; use for gardening or cleaning.

Storage Tank Water Management

Discard stored water every 15 days or if unused for over 2 days.

Object Placement and Cord Safety

Avoid placing heavy objects; keep cords away from hazards.

Electrical Cord Handling

Do not plug/unplug with wet hands; ensure plug is dry.

Water Splashing Prohibition

Never splash water on the filtration system during cleaning.

Power Cord and Adapter Safety

Replace damaged power cords; avoid using extension cords.

Temperature and Freezing Precautions

Do not install where freezing occurs; avoid hot water over 45°C.

Moving and Packing Procedures

Get purifier inspected and packed by service technician when shifting.

Emergency Protocol for Smoke;Smell

Remove plug immediately and call helpline if smoke or burning smell occurs.

Storage Tank Monthly Cleaning

Clean tank monthly using disinfectant solution; drain after 10 minutes.

Foreign Material Prevention

Prevent entry of dust, insects, or pests into the storage tank.

Consumables Disposal

Dispose used consumables with household waste via municipal system.

Indicator Reliance for Replacements

Rely on RED indicator for consumables replacement; RO Purity Lock is assurance.

Advance Alert System of Pureit Marvella RO+UV

Indicator Status and Frequency

Details on storage tank, SF, GKK-1, and GKK-2 indicator lights and their meanings.

Germkill Kit Replacement Schedule

Guidance on when to change Sediment Filter (SF), GKK-1, and GKK-2.

Key Electrical Fault Indicators

Indication of faults like UV, RO Pump, or booster pump failure.

Ordering Consumables

Contact information for ordering SF, GKK-I, and GKK-2.

Frequently Asked Questions (FAQs)

Water Purification Process

Explanation of how Pureit Marvella RO+UV purifies water through its 6 stages.

Storage Tank Capacity

Details on the 10-litre storage tank and automatic refilling process.

Water Purification Time

Information on purification rate (9-12 litres/hour) and influencing factors.

Consumables and Membrane Replacement

Procedure for ordering and replacing new consumables via Pureit Helpline.

First Purification Cycle

Recommendation to discard the first cycle of purified water.

No Purified Water in Tank

Troubleshooting steps for when the storage tank is empty.

User Servicing Prohibition

Discourages individuals from opening or servicing the purifier.

Water Type for Purification

Guidance on suitable input water types and need for pre-treatment.

Filter Choking Before Alert

Possibility of filters choking early based on input water quality.

Reject Water Usage

Recommendation against using reject water for consumption; suitable for gardening.

Handling Broken Parts

Procedure for reporting and repairing broken parts via Pureit Helpline.

Leakage Resolution

Steps to take if a leakage is detected from the purifier.

Stored Water Shelf Life

Guidance on how long stored water remains safe for drinking (2 days).

Troubleshooting

Unusual Water Taste

Possible causes for unusual taste, including tank cleaning and filter replacement.

Reduced Purification Speed

Reasons for slower purification, like Ball Valve position or filter condition.

Storage Tank Not Filling

Troubleshooting steps for an unfilled storage tank, checking indicators and leaks.

Warranty Card

Warranty Registration Details

Fields for serial number, purchase date, customer, and dealer information.

Warranty Card Notes

Reminders to retain the bill of purchase and quote serial number.

Pureit Marvella RO+UV Warranty Details

Product Warranty Coverage

Details on the guarantee of 'As Safe As Boiled Water™' and coverage terms.

Warranty Exclusions

Consumables, accessories, and external parts are not covered under warranty.

Component Warranty Period

12-month warranty on electrical parts against manufacturing defects.

Warranty Conditions and Claims

Requirements for notifying defects, inspection, and company's obligation.

Warranty Voidance Conditions

Situations where warranty becomes void, like improper operation or unauthorized repairs.

General Warranty Definitions

Definitions of key terms like 'Pureit Marvella RO+UV', 'customer', 'company', and 'invoice'.

Statement of Hindustan Unilevers Intellectual Property Rights

Covered Intellectual Property

Lists intellectual property rights including product names and technologies.

Pureit Marvella RO+UV Specifications

General

Purification Technology	RO+UV
Storage Capacity	10 Litres
Power Consumption	36 Watts
Input Water Temperature	10-40°C
Purification Capacity	Up to 15 Litres/hour
SmartSense Indicator	Yes
UV LED	Yes
Warranty	1 year
Filter Life	6000 Litres
TDS Reduction	Up to 90%
Voltage	230V AC, 50 Hz