What Are the Benefits of This Upgrade?
The RO membranes used in all Reef Pure RO Systems have an
optimal minimum operating pressure of 50psi.
By adding the PurePro HF-8367 RO Booster Pump to your system,
you no longer need to worry about a lack of pressure on your
homes water supply.
Your system will produce almost twice the amount of water in the
same amount of time. You will produce less wastewater and a
much lower TDS value on your RO production water, which will
also dramatically reduce your DI resin replacement costs.
What Do I Need?
This kit includes everything that you will need to successfully upgrade your system with an RO
Booster Pump.
Useful Tools
•
RO Tube Cutters or a Utility Knife
Before You Get Started!
You will need to locate an area that you can mount the PurePro HF-8367 RO Booster
Pump.
A mounting bracket is supplied with the booster pump and it is important that it is mounted using
this bracket as it acts to reduce vibration and noise.
IMPORTANT: Do not run the booster pump for periods greater than 3 hours. Doing so
can cause serious and permanent damage to the pump. Allow a rest period of 1 hour
between uses.
To Next Page
Need help?
General
