PurePro M800-DIRECT FLOW - Installation Diagram; Change Filters

Install European ceramic faucet :
PURE-PRO REVERSE OSMOSIS SYSTEM
07 08
PURE-PRO REVERSE OSMOSIS SYSTEM
P
R
O
P
URE
DRINKING WAT ER SYSTEM
Install drain saddle :
1.Remove the membrane housing cap.
2.Replace the membrane.
Assemble membrane :
Drill a 1/4" hole into
the drain pipe.
Mount drain
saddle aligning
holes.
Installation diagram
5 Turn on water source and water
tank, drain out 1 Gallon of water
to purify replacement filters.
P
R
O
P
URE
DRINKING WAT ER SYSTEM
Change filters
2 Turn off water source.
To RO system
3 Loose the Jaco fitting anticlockwise.
Jaco
4 Remove the used filters from clips
and replace with new ones.
1 Unplug electricity.
M800-Direct Flow Reverse Osmosis Water Systems M800-Direct Flow Reverse Osmosis Water Systems
Input water :
To RO system
Deliver valve
To faucet
To water source pipe