PUREWAVE CM-07 - Troubleshooting and Warranty; Troubleshooting Massager Issues; 1-Year Limited Warranty Terms

10
Troubleshooting
■
Massager does not work
1. Make sure massage is fully charged. The POWER LIGHT should be green.
2. RESET PROCEDURE: Reset the massager by turning power o. Plug the CHARGER into an outlet, then
plug the CHARGER into the product. Wait about three seconds then unplug both sides of CHARGER
and then turn product on and start massaging.
3. The Lithium-ion battery life may have reached its cycle limit.
■
The massager does not start right away
1. For percussion mode there it takes up to 3 seconds for massager to start. Turn dial to engage and
increase speed/intensity. Power light should be solid green.
2. For facial massager you must keep dial in the “0” position for 3 seconds or until green power light is
blinking. Turn dial to engage or increase speed/intensity.
*
For more troubleshooting refer to www.PadoUSA.com/ online troubleshooting guide.
Warranty (1-Year Limited)
For your safety and to avoid any property damage, please read this manual carefully and use as indicated.
The manufacturer’s warranty is void under the following circumstances but not limited to:
1. Improper or inadequate maintenance or modication
2. Accident, misuse, abuse, contamination or other external causes
3. The use of unspecied adapter and accessories
4. Loss or damage in transit
5. Damages that occurs as a result of one’s failure to follow the instructions
This Warranty does not apply to expendable or consumable parts and does not extend to any product
from which the serial number has been removed.
Save These Instructions
If you need another copy of the owner’s manual, you can download them from
www.PadoUSA.com
One (1) Year Limited Warranty from date of purchase
Name of product Warranty terms
Model name Pure-Wave CM-07 One year
Manufacturing No.
Date purchased
Customer signature