8
Setting the volume
With a switch on the board the volume of the unit can
be set in two differnet volumes
For the full volume the switch has to be on position B, for
a reduced volume the switch has to be on A
Switch position A = Reduced sound level
100m distance approx 90db(A)
Switch position B = Full sound level
100m distance approx 96db(A)
9
Setting the number of shots
Changing the number of shots only when the unit is turned off!
Wait 15 seconds before turning the unit on again so it can re-set properly.
1 shot = both switches up
2 shot = left up / right down
3 shot = left down / right up
4 shot = both switches down
The recommended number of shots is 3.
Tests have shown that the best results will be made with the 3 shots.
To Next Page
Loading...
