©Copyright 2016-2021 Purple Leaf Inc. All Rights Reserved
Take the screw out from NO.5 screw kit
After assebling all zip blinds,
test to make sure that all manual blinds can go up and down smoothly
Tighten the screw and fix the plastic cap
Attach the zip blinds to the 2 posts Putting the cover of zip blinds clip into the gap on
the post top
11 12
Repeat to assemble all zip blinds Clip the post head into the post
Make a slight adjustment if there is any difficulty to put the zip blind in
Hard ground like mattess
Recommended accessories
(Manufacturer do not supply)
Recommended specifications: 10*100mm
To Next Page
Need help?
General