Why does my Pursonic Fitness Equipment make unusual noises?
If your Pursonic Fitness Equipment is making unusual noises or not vibrating correctly, ensure that the weight is evenly distributed on the vibrating plate. Uneven weight distribution can cause these issues. Also, confirm that the device is not overloaded, as it has a maximum load capacity of 120 kg. Exceeding this weight limit can cause improper functioning.
What to do if my Pursonic Fitness Equipment switches off too early?
If your Pursonic Fitness Equipment switches off prematurely, it may be due to overloading. Try flipping the I / 0 main power switch to position I and waiting a moment before switching it on again. Remember that the device has a maximum load of 120 kg, which must not be exceeded for proper operation.
General| Brand | Pursonic |
|---|---|
| Model | JF-CFM15 |
| Category | Fitness Equipment |
| Language | English |
Device usage by children aged 8+, supervision requirements, and restrictions on unsupervised cleaning.
Keep children/animals away, disconnect power when unattended, use approved cables.
Warnings about suffocation, trip hazards, and consulting a doctor for health risks.
Prohibits use after fractures, with vein inflammation, or during pregnancy without doctor's advice.
Precautions against water, wet hands, operating in closed rooms, and flammable gases.
Keep batteries from children, handle leaks carefully, use correct types, and dispose properly.
Avoid exceeding load capacity, protect floors, check for damage, and keep away from heat sources.
Unpack all parts, check for completeness and transport damage, contact service if issues found.
Insert AAA batteries into the remote control, ensuring correct polarity.
Place on a dry, firm surface, away from walls, connect mains cable to a suitable socket.
Consult doctor for health risks, start slow, stop if feeling unwell, avoid kneeling or jumping.
Details on nine automatic programmes, including beginner options (0 and 1).
Powering on, selecting programmes, setting time, and starting the vibration.
Control via remote or control panel, positioning on the plate (WALKING, JOGGING, RUNNING zones).
Selecting programmes, setting workout time, and adjusting vibration levels.
Displays for time, programme, and calorie consumption; manual stop function.
Turning off the device, unplugging, and moving it using the transport castor.
To Next Page